New Products
PLC's
Window CE PLC's
PLC Trainers
Analog Modules
Operator Panels
Control and Monitoring thru Excel
SCADAsPC Control Power Supplies Relays Position Transducers RS232/Ethernet Converter Wireless Modem Power monitoring Protection Devices
Variable Frequency Drives Industrial Computer Application Proyects Combos Tech Support Downloads
Who are we? Our customers FAQ´s How to order Contact Us Home
5209 NW 74 AVE . SUITE 202 MIAMI, FL. 33166 USA 1-888-832-7568 Toll free 305-593-8999 Tel 1-775-637-6825 Fax
Photograph of E10-npn+ and E10-Relay+
and all timer/counter range are 0-9999.
Only 5.4cm x 5.4cm x 2.0cm
DIN-Rail Mounting Kit option
I think the E10-npn is a gem. I work in R&D and machine building for Die-Tech, Inc. ... the E10 has proven to be a perfect fit for us. The E10 made the electronics box smaller, cooler running, and more robust. And in the bargain, our manufacturing cost was cut by two-thirds. That's real value in a product.".
Michael Dennis, USA (info@die-tech.com)
Die-Tech, Inc. http://www.die-tech.com
Technical Specifications
E10-npn+
- 12 to 30V DC Power Supply
- 6 Inputs with LED Indicators (12~30V DC, NPN type)
- 4 Outputs (each output can sink 1A @ 12~30V DC)
- 8 internal relays+2 internal outputs
- 4 timers (0.1s to 999.9s) 4 counters(1 to 9999)
- 1 sequencer with 32 steps (step# 0 - # 31)
- 216 program steps (1 contact = 1 step)
- Programmable in Ladder Logic software With SIMULATOR.
- Creates ladder program using meaningful names:-
- Uses simulator to fully test programs on the PC screen before downloading
- On-line monitoring of all I/O logic states on ladder diagram or on full screen
- Forced-setting/resetting of i/os can be done directly from computer screen.
- EEPROM Program Storage (40 years)
- Screw Terminal Blocks - Supports HostLink Command Protocol - The E10+ PLC can be used as a low cost I/O board for PC or other host processor board - Download Host Link Command Reference Manual
E10-Relay+
- 24V AC (0.3A transformer)
- 6 Inputs with LED Indicators (24V DC, PNP type)
- 4 relay Outputs (2 commons. Each output can switch 2A @ 250V AC)
- Requires Opto232 adapter for programming by a PC.
- All the rest are same as E10-npn+.
I. Introduction
Finally, a PLC so small and cost so little that it can effectively replace all those bulky relays, timers or counters found in your current control panels. Its 24V DC transistor outputs or 0 to 250V AC relay outputs eliminate the need for additional driver circuitry and its incredibly low price means you actually save money while getting a technically superior design for your next control panel project! Despite its simple appearance, the E10+ PLCs share equally sophisticated programming tools with their larger siblings - which comprise the T22H with 12 inputs / 10 outputs to the T64H with 40 inputs and 24 outputs.An E10+ PLC is programmable using an extremely user-friendly ladder logic editor-cum-simulator software -WinTRiLOGI Version 3.5 (Click here to download its Help document). This software now runs under Windows operating systems (95,98,ME, NT,2000,XP).
(Notes: for existing E10npn or E10-Relay users: The new E10npn+ and E10Relay+ PLCs are backward compatible with the older generation E10 PLCs. This mean that you can continue to use the DOS TRiLOGI software that you have been using for many years to program the E10+ without switching to the Windows version. You will get the full 216 programming steps but your timers and counters are limited to 0-254. Only the WinTRiLOGI software supports 0-9999 range for E10+ timers and counters.)
II. Hardware Specifications
E10-Relay+ |
E10-npn+ |
||
| 1. | Power Supply |
- AC 24V (current = 0.2A) - Rectified DC24V availale for sensor. |
- DC 12 to 30V (+ 10% ripple) - Current 0.5~2A (load dependent) |
| 2. | CPU
Program Storage Size |
216 steps stored in EEPROM |
216 steps stored in EEPROM |
| 3. | Input Circuits
Number of inputs |
6 (PNP type) |
6 (NPN type) |
| 4. | Output Circuits
Number of outputs |
4 |
4 |
| 5. | Dimension | 7.8cm (L) x 5.6cm (W) x 2.5cm(H) |
5.4cm (L) x 5.4cm (W) x 2.0cm(H) |
| 6. | Weight (approximate) | 75g |
35g |
| 7. | Price | U$ 79 |
U$ 69 |
| 8. | Starter Kit | U$ 129 |
U$ 99 |
III. Software Features and Programming Methods
E10-npn and E10-Relay Installation Guide - "INSTE10Nand INSTE10R
We welcome any technical institutes and colleges to use the TRiLOGI software and PLC Trainers to train students on ladder logic programming at no charge at all! We would appreciate it if you could email to us at: sales@latin-tech.net to inform us that you will be providing a link to our website at: www.latin-tech.net so that the students can download the TRiLOGI software from our web page to do their homework! Suggestions and feedback on our products would be greatly appreciated. Please tell your friends and colleagues about the program if you enjoy using it.
Please visit this Internet Trilogi PLC software Tutorial
by Prof T.C. Chang, Purdue University, Indiana.
PLC Training Course Instructor Comments:
"I use TRiLOGI in the college classroom. I have each student download and install TRiLOGI on their home computer, and I then give them programming assignments to do at home. They individually write, run and debug their PLC programs, and then email their program files to me for testing and grading. Since TRiLOGI will simulate PLC operation off-line, each student is able to obtain hands-on programming and debugging experience without having to wait for their turn on an expensive laboratory PLC. The students enjoy using TRiLOGI because they can see their programs run at home without loading them into an actual PLC, it is easy to learn, and the cost for the off-line version is zero."
Prof John Hackworth, Old Dominion University
For any additional information please CONTACT US, let us know what you need!!