New Products
PLC's
Window CE PLC's
PLC Trainers
Serial Modules
Operator Panels
Control and Monitoring thru Excel
SCADAs
 
Power Supplies
Relays
Position Transducers
RS232/Ethernet Converter
Wireless Modem
Power monitoring
Protection Devices
 
Variable Frequency Drives
Industrial Computer 
Application Proyects
Combos 
Tech Support
Downloads
 
Who are we?
Our customers
How to order
Contact Us
Home
 

Latin-Tech Inc.

       
       
   
         5209 NW 74 AVE . SUITE 202        MIAMI, FL. 33166 USA         1-888-832-7568 Toll free        1-775-637-6825 Fax
 

Electrical Parameters

Measurement, Control and Monitoring

Now you can monitor your electrical equipment at the lowest cost available.

AC Voltage, Current, Power Factor, Energy, Demand,etc

Control your loads and cut down demand and energy costs.

Using these devices, in combination with other of our products you can control, monitor and get reports of your per machine-power usage.

These Power Transducers are ideal for Energy Management Systems.
  • Accurate true RMS measurements.
  • EMS Compatible Outputs.
  • Compact Size and Quick Installation.
  • Interfacing with standard 5A CTs or miniature current transformers.
  • Low Voltage Installation.
   
  ET3 - Advanced Power Transducer
The ET3 Advanced Power Transducer adds comprehensive and accurate power monitoring to Control and Energy Management Systems.  It may be installed in single, split or three phase configurations.  In addition to four analog outputs and one pulse output the transducer offers RS-485 (Modbus) digital communication for monitoring over 20 electrical parameters.  An optional Remote Display Module further enhances the ET3 applications.
 
   
 

Features:

  • High Accuracy (0.5%), true RMS
  • Optically isolated (up to 3250V) output signals
  • Output signals compatible with any standard EMS system
  • Digital communication via RS-485 (MODBUS RTU)
  • Accepts voltages up to 600VAC directly
  • Rolling Window demand calculations
  • Optional Remote Display Module
  • Low Price
 
 
U$ 337.00
                                   
 
Data Sheet
                                   
ETM1- TRMS 1 phase power transducer
 
The ETM1 is a cost effective, true RMS single phase power transducer that provides pulses proportional to energy consumption (watt-hours) and two analog signals proportional to other power.

Features:

  • Accurate, true RMS measurements.
  • EMS compatible: Slow SPDT pulses for DDC, Standard 100ms pulses for totalizers and counters, two 5V analog outputs.
  • Direct connection up to 240VAC.
  • Standard 5A CT or small MCT current sensors that may eliminate the need for CTs.
  • Reversed wiring immunity.
  • Fast and easy installation (Din Rail).
U$ 140.00
Data Sheet
ETM2- Split phase power transducer
The ETM2 is a cost effective, true RMS split phase power transducer that provides pulses proportional to energy consumption (watt-hours) and two analog signals proportional to other power.

Features:

  • Accurate, true RMS measurements.
  • EMS compatible: Slow SPDT pulses for DDC, Standard 100ms pulses for totalizers and counters, two 5V analog outputs.
  • Direct connection up to 240VAC.
  • Standard 5A CT or small MCT current sensors that may eliminate the need for CTs.
  • Reversed wiring immunity.
  • Fast and easy installation (Din Rail).
U$ 143.00
Data Sheet
MOC1- True RMS 3 phase power transducer
The MOC1 is a cost effective, true RMS three phase power transducer that provides pulses proportional to energy consumption (Watt - Hour) and two analog output signals; one is to the instantaneous value of real power (Watts) while the other may be set to represent either VA, Averaged Current, Averaged Voltage or Power Factor.

Features:

  • Accurate, true RMS measurements at low cost.
  • EMS compatible output signals: Slow pulses for kW/h, 0-5 VDC (4-20mA optional) for kW and either kVA, Iabc, Vabc or PF.
  • Direct connection up to 600 VAC with supplied approved isolation transformers.
  • Standard 5A CT or small MCT current sensors that may eliminate the need for CTs.
  • Ideal for low voltage installations.
  • RS485 communication available.
U$ 210.00
Data Sheet
MCT- Solid core current sensors

Features:

  • Current sensors for the EMT1, EMT2 and MOC1 power transducers.
  • MCT current sensors do not produce high voltage surge when opened. They generate a low voltage output signal and no special protection and shorting blocks are required.
MCT05          Imax=75A         U$ 21.00
MCT1            Imax=150A       U$ 23.00
MCT2            Imax=300A       U$ 26.00
Data Sheet
MSCT- Split core current sensors

Features:

  • Current transformers for all our power transducers.
  • MSCT current sensors do not produce high voltage surge when opened. They generate a mV signal level and no special protection and shorting blocks are required. Maximum open secondary voltage is clamped at about 22 V peak.

NOTE: MSCT current sensors shall be installed on insulated conductors only.

Data Sheet
MSCT1            Imax=150A         U$ 48.00
MSCT2            Imax=600A         U$ 53.00
MSCT3            Imax=1500A      U$ 63.00
ETVI- Voltage to Current transducer

Features:

  • Cost effective solution
  • High accuracy
  • Manual output override
  • Loop current indication
  • Small size and easy installation

Application: The ETVI two channel board converts analog voltage, typically 0 to 10 VDC, to an industrial standard 4-20 mA signal. This board can be used to interface a generic DDC panel that provides voltage output with any loop current driven device.

U$ 52.00
Data Sheet

For any additional information please CONTACT US, let us know what you need!!

   
   
   
 
© LATIN TECH 2005